Voopoo – TPP-DM Coils (each)
Select options
This product has multiple variants. The options may be chosen on the product page
Vaporesso – GTX series coils (each)
aporesso GTX version 2 mesh coils 0.4Ω Ohm.
Wattage range 26-32W.
These are the more recent ‘Triple Silicon Protection’ coils. You will see there is an additional red silicone seal near the base.
Applicable to the following Vaporesso devices as long as you’re using the original tank/pod that comes as part of the kit (check before purchase if you’re not sure):
Gen Fit 40 (with iTank X)
Gen Nano Kit (with GTX Tank 22)
Gen PT60 Pod Kit (with X-Tank Pod)
Gen PT80S Pod Kit (with X-Tank Pod)
GTX GO40 Pod Kit
GTX GO80 Pod Kit
GTX Tank 22
Luxe 80 Pod Kit (with GTX Pod)
Luxe 80S Pod Kit (with GTX Pod)
Luxe XR Pod Kit
Swag PX80 Kit and PX80 Pods
Target 80 Kit
Target PM80 Kit and PM80 Pods
Target PM80 SE
Not compatible with:
Luxe PM40 kit and pods (applicable coils are the GTX 0.6, 0.8 and 1.2 Ohm)
GTX ONE Kit (with GTX Tank 18) (applicable coils are the GTX 0.6, 0.8 and 1.2 Ohm
Select options
This product has multiple variants. The options may be chosen on the product page
Vaporesso – GTi Coil (each)
Coil Resistance: GTi 0.15ohm Mesh Coil(75-90W)
Coil Resistance: GTi 0.2ohm Mesh Coil(60-75W)
Coil Resistance: GTi 0.4ohm Mesh Coil(50-60W)
Fit for: Vaporesso Target 100/200 Kit, Vaporesso iTank
Select options
This product has multiple variants. The options may be chosen on the product page
Uwell – Crown coils (each)
Uwell Crown 5 Replacement Coils, a set of mesh coils designed to boost flavor and vapor production from your favorite eJuice.
Uwell CROWN 5 Replacement Coils Features:
Uwell CROWN 5 Coil Series
0.23ohm UN2 Single Mesh Coil – rated for 65-70W
0.3ohm UN2-2 Dual Mesh Coils – rated for 50-55W
0.2ohm UN2-3 Triple Mesh Coils – rated for 65-70W
Press-Fit Coil Installation
Pro-FOCS Flavor Testing Technology
Make sure to properly prime each coil and pod before use.
Select options
This product has multiple variants. The options may be chosen on the product page
Geek Vape – Aegis Boost Mesh coil
The Geekvape Aegis Boost Coil is designed for Geekvape Aegis Boost kit and Geekvape Aegis Boost cartridge with 0.4ohm/0.6ohm coil. And The Aegis Boost coil is definitely an excellent replacement coil with a high-quality flavor.
0.6ohm KA1 Mesh Coil - Rated 15-25W
0.4ohm KA1 Mesh Coil - Rated 25-33W
Plug 'n' Play Coil Installation
Select options
This product has multiple variants. The options may be chosen on the product page
Geek Vape – G coil
Wattage range 9.5-18W.
There are four versions of this coil (see our other product listings) and they all support MTL (mouth-to-lung) vaping and higher PG liquid (50VG, 60PG etc).
Applicable to the following Geek Vape devices:
Aegis Pod
Wenax Stylus
Wenax C1
Coils in the Geek Vape G series:
G0.6 0.6Ω Ohm - mesh and kanthal wire (13-18W)
G0.8 0.8Ω Ohm - mesh and kanthal wire (12-15W)
G1.0 1.0Ω Ohm - mesh and kanthal wire (10-12W)
G1.2 1.2Ω Ohm - mesh and kanthal wire (9.5-11.5W)
Select options
This product has multiple variants. The options may be chosen on the product page
Geek Vape – P coil
Wattage range 50-70W.
Compatible with the following Geek Vape devices:
Aegis Boost Pro Kit
The box comes with a hologram and scratch sticker so you can check the authenticity of this product.
Coils in the Geek Vape Aegis Boost Pro P series:
P0.2 - 0.2Ω Ohm - mesh (60-70W)
P0.4 - 0.4Ω Ohm - mesh (50W-60W)
Select options
This product has multiple variants. The options may be chosen on the product page
Geek Vape – Zeus Coils
Wattage range 80-90W.
Applicable to the following Geek Vape products:
Sub-Ohm Tank
Sub-Ohm 2021 Tank
L200 Kit
Obelisk 120 FC
The box comes with a hologram and scratch sticker so you can check the authenticity of this product.
Coils in the Geek Vape Z series:
Z0.15 XM - 0.15Ω Ohm (70-85W)
Z0.15 - 0.15Ω Ohm (80-90W)
Z0.2 - 0.2Ω Ohm (70-80W)
Z0.25 - 0.25Ω Ohm (45-57W)
Z0.4 XM - 0.4Ω Ohm (50-60W)
Z0.4 - 0.4Ω Ohm (60-70W)
Select options
This product has multiple variants. The options may be chosen on the product page
Uwell – Caliburn G2 UN2 / Caliburn G Coils (each)
Uwell Caliburn G2 Coil
Replacement Coil is designed for Uwell Caliburn G2 Pod System Kit 750mah. Uwell Caliburn G2 cartridge adopts Pro-FOCS flavor adjusting tech to provide you with an original taste and pure flavor.
Parameters:
Resistance: FeCrAI UN2 Meshed-H 1.2ohm(9-13W)
Features:
Pro-FOCS flavor adjusting tech
MTL & restricted DTL vaping
_____________________________________________________________________________
Uwell Caliburn G Coil
is designed specifically for use with the Uwell Caliburn G Pod Kit. The coils are available in two types of resistances. With a 0.8ohm mesh coil and a standard 1.0ohm coil to choose from. Suitable for both mouth-to-lung and direct-to-lung vaping. Replacing the coils is simple thanks to the pod’s plug and play design. Simply slide the old coil out of the base, press-fit the new coil from the bottom of the pod to install. It is recommended to pair using the two coils with a high PG e-liquid with a PG content greater than or equal to 50% to achieve the best performance. Stock up on Caliburn G Coils to always ensure a tasty vaping experience at a budget-friendly cost.
Select options
This product has multiple variants. The options may be chosen on the product page
Uwell – Caliburn G3 Pods 2/2.5ML (each)
Uwell Caliburn G3 Replacement Pods (1pc)
Uwell Caliburn G3 Replacement Pods, featuring a 2.5mL capacity, integrated 0.6ohm or 0.9ohm coils, and deliver unrivaled flavor from your eJuice.
Uwell Caliburn G3 Replacement Pods Features:
Pod Capacity: 2.5mL
Construction: PCTG
Fill-System: Side Fill System
Coil Resistances: 0.6ohm / 0.9ohm
Coil Installation: Integrated Coil
Pod Connection: Magnetic
Select options
This product has multiple variants. The options may be chosen on the product page
Uwell – Caliburn A2 Pods
The Uwell Caliburn A2S Replacement Pod is the original pod cartridge designed for Caliburn A2S Pod System, also compatible with Caliburn A2. Featuring a silicone stoppered side filling to hold 2.0ml of your favorite E-juices or nicotine salts, the Caliburn A2S Pod comes with an integrated 1.2ohm mesh coil to provide delicious vapor.
Uwell Caliburn A2S Replacement Pod Features:
For Caliburn A2S Pod System
Compatible with Caliburn A2
2.0ml Pod Capacity
Silicone Stoppered Side Filling
Integrated 1.2ohm Mesh Coil
Magnetic Pod Connection
Easy to Replace
The Uwell Caliburn A2 Replacement Pods are designed for use with the Uwell Caliburn A2 Sub-Ohm Pod System. They offer 2mL of e-Liquid capacity and feature Pro-FOCS Technology, which provides optimum flavour and intense steam production. The pods come in packs of four with 0.9ohm UN2 mesh coils preinstalled for optimal performance. Each pod is equipped with a 1.5-ohm coil, which provides a smooth vape experience and great flavour production! The pods also feature an easy top fill design that allows you to quickly add your favourite e-liquid into each pod.
2ml pod capacity delivers enough juice to last you all day long. No need to refill!
0.9ohm meshed coil offers the perfect balance of flavour and vapour production. Longer lasting coil life than traditional
coils.
Easy to use as simply remove the used pod from your device and replace it with a new one.
Proprietary mesh coil system provides excellent flavour recreation and enhanced airflow for a truly satisfying experience
Features an innovative design with a top fill system, allowing you to easily refill your pods without the hassle of removing
the coil head.
Select options
This product has multiple variants. The options may be chosen on the product page
Geekvape – B100 Replacement Pod – 4.5ml
Geek Vape Aegis Boost Pro 2 Replacement Pods, offering a 4.5mL refillable capacity, Top Side Fill System, and utilizes Geek Vape P Coils.
GeekVape Aegis Boost Pro 2 (B100) Replacement Pods Features:
Pod Capacity: 4.5mL
Construction: PCTG
Fill-System: Top Side Fill
Coil Support: Geek Vape P Coils
Coil Installation: Press Fit
Pod Connection: Magnetic