Vaporesso – MTX Coil 1.2ohm (each)
Vaporesso Gen Fit ITank-M MTX CoilS 1.2 Ohm
Pack of 5 genuine replacement Vaporesso MTX coils 1.2Ω Ohm. Applicable to the following Vaporesso devices (as long as you're using the original tank which comes as part of the kit):- Gen Fit Kit (ITank M tank - not the ITank which takes the GTI coils)
Hellvape P7 Coil (each)
The brand new Hellvape Hellbeast 2 Coils by Hellvape features a larger capacity area between
the mesh wire and the cotton for even heating and a smoother draw, whilst also producing huge vapour production and a rich flavour for sure. The coils are installed via a push pull system, simply unscrew the base slot the coil in screw the base back on and away you go. Hellvape have only currently produced one P Series coil but we are certain more will come in the future (0.15ohm is in production), the P7-02 is a 0.2ohm coil that is best between 50-60w
Smok – Nord DC 0.8ohm MTL Coil (each)
Voopoo – PnP X Coil (each)
Voopoo PNP X Replacement Coils
Replacement coils are used in the VooPoo Drag X2, Drag S2 pod vape kits and PnP X pod cartridges.
These mesh-constructed coils are available in four different resistances and power outputs for mouth-to-lung (MTL), restricted-direct-lung (RDL) and direct-to-lung (DTL) vaping.
PnP X – 0.3Ω (32-40w) RDL + MTL
PnP X – 0.2Ω (40-60w) DTL
*Sold As Singles*
Select options
This product has multiple variants. The options may be chosen on the product page
Vaporesso – GT Cores (each)
Vaporesso GT CCELL 2 stainless steel and ceramic coils 0.3Ω.
Compatible with the following Vaporesso tanks:
- NRG tank
- NRG Mini tank
- NRG SE tank
- Cascade tank (you will need to use the 'GT coil adapter)
- Cascade Baby tank
- Cascade Mini tank
Select options
This product has multiple variants. The options may be chosen on the product page
Smok – Novo 4 LP1 coil (each)
The Smok Novo 4 Replacement LP1 Coils are specially designed for leak-proof vaping. Each coil in this series uses 3 silicone rings to provide tightness. The LP1 series coils have: LP1 Meshed 0.8ohm Coil, LP1 DC 0.8ohm MTL Coil, and LP1 Meshed 1.2ohm Coil. When inserting the coil into the Smok Novo 4 Pod, the added silicone ring on the bottom of the coil would fill the gap, effectively stemming the liquid leaking from the pod that results in a messy vaping experience or dirty hand. The LP1 series Coil is compatible with Smok Novo 4 Pod Cartridge and Smok Novo 4 Pod Kit, Novo 4 mini kit, pozz pro kit, and Nfix Pro Kit.
Features:
LP1 Meshed 0.8ohm Coil, Best 12W
LP1 DC 0.8ohm MTL Coil, 12-25W
LP1 Meshed 1.2ohm Coil, 10-15W
LP1 Meshed 0.9ohm MTL Coil, Best 15W
Fit for Smok Novo 4,Novo 4 Mini,Pozz Pro,Nfix Pro Kit
Select options
This product has multiple variants. The options may be chosen on the product page
Smok – LP2 Coil (each)
SMOK LP2 Replacement Coils
SMOK LP2 Replacement Coils, featuring 0.23ohm and 0.6ohm in Meshed and Dual Coil options, to deliver delicious vapor in MTL or DL fashion.
SMOK LP2 Replacement Coils Features:
SMOK LP2 Coil Series
0.23ohm LP2 Meshed Coils – rated for 20-45W
0.6ohm LP2 DC Coils – rated for 15-25W
Press Fit Coil Installation
Select options
This product has multiple variants. The options may be chosen on the product page
Smok – RPM 3 Mesh Coil (each)
Smok RPM 3 Mesh Coils
Smok RPM 3 Mesh Coils the all-new RPM 3 coil is the new mesh coil that has been adopted to enhance the flavor more efficiently, and due to the larger mesh surface area. With this being said the RPM 3 coil delivers a hotter more tantalizing vape keeping you coming back for more.
The Smok RPM 3 Mesh coils come in two variations-
RPM 3 Mesh 0.15ohm (40-80w)
RPM 3 Mesh 0.23ohm (20-45w)
Select options
This product has multiple variants. The options may be chosen on the product page
Smok – RPM 2 Mesh Coil (each)
The Smok RPM2 Mesh Coils, which designed for high-quality vapor and flavor, with the mesh wire inside, the large e-juice contact area will heat the juice fastly and evenly, bring you dense vapor and intense flavor, you could use them for direct lung vaping. you also can choose the DC MTL Coils, which with the larger heating area for fast heating, will bring you a better MTL vaping experience. the Smok Mesh Coils for the Scar-P3 and Scar-P5 Pod Kits.
Select options
This product has multiple variants. The options may be chosen on the product page
Smok RPM Coil (each)
Select options
This product has multiple variants. The options may be chosen on the product page
Voopoo – TPP-DM Coils (each)
Select options
This product has multiple variants. The options may be chosen on the product page
Vaporesso – GTX series coils (each)
aporesso GTX version 2 mesh coils 0.4Ω Ohm.
Wattage range 26-32W.
These are the more recent ‘Triple Silicon Protection’ coils. You will see there is an additional red silicone seal near the base.
Applicable to the following Vaporesso devices as long as you’re using the original tank/pod that comes as part of the kit (check before purchase if you’re not sure):
Gen Fit 40 (with iTank X)
Gen Nano Kit (with GTX Tank 22)
Gen PT60 Pod Kit (with X-Tank Pod)
Gen PT80S Pod Kit (with X-Tank Pod)
GTX GO40 Pod Kit
GTX GO80 Pod Kit
GTX Tank 22
Luxe 80 Pod Kit (with GTX Pod)
Luxe 80S Pod Kit (with GTX Pod)
Luxe XR Pod Kit
Swag PX80 Kit and PX80 Pods
Target 80 Kit
Target PM80 Kit and PM80 Pods
Target PM80 SE
Not compatible with:
Luxe PM40 kit and pods (applicable coils are the GTX 0.6, 0.8 and 1.2 Ohm)
GTX ONE Kit (with GTX Tank 18) (applicable coils are the GTX 0.6, 0.8 and 1.2 Ohm
Select options
This product has multiple variants. The options may be chosen on the product page
