Steam Craft – Ak-47R 3.0mm (Set of 2)
Custom hand-crafted performance coils by Steam Craft Customs, using only the best wire components and meticulous attention to detail.
The AK-47 & AK-47 R range is designed for intense flavor, saturation, and extra crackle.
AK-47
Higher resistance, fast ramp-up and lower battery drain
Alien design / Full Nichrome / 3.0mm ID / 7 wraps
Dual coil: +- 0.29 Ω (+- 60-80w)
Single coil: +- 0.58 Ω (+- 30-40w)
AK-47 R
‘R’ for… Racing, or Rowdy, or Replay… or all of the above!
Lower resistance, faster ramp-up, slightly warmer
Also suitable for use in Replay- and Temp Control modes
Alien design / Full Nichrome / 3.0mm ID / 7 wraps
Dual coil: +- 0.21 Ω (+- 60-80w)
Single coil: +- 0.42 Ω (+- 30-40w)
Geek Vape – Zeus Z0.4 XM Coil 0.4 Ohm (each)
Hellvape – NI90 Pre-Build Coils (Set of 2 Coils)
Vaporesso – GTX Coils 0.4 Ohm Mesh coil (each)
Vaporesso GTX version 2 mesh coils 0.4Ω Ohm.
Wattage range 26-32W.
These are the more recent 'Triple Silicon Protection' coils. You will see there is an additional red silicone seal near the base.
Applicable to the following Vaporesso devices as long as you're using the original tank/pod that comes as part of the kit (check before purchase if you're not sure):
Gen Fit 40 (with iTank X)
Gen Nano Kit (with GTX Tank 22)
Gen PT60 Pod Kit (with X-Tank Pod)
Gen PT80S Pod Kit (with X-Tank Pod)
GTX GO40 Pod Kit
GTX GO80 Pod Kit
GTX Tank 22
Luxe 80 Pod Kit (with GTX Pod)
Luxe 80S Pod Kit (with GTX Pod)
Luxe XR Pod Kit
Swag PX80 Kit and PX80 Pods
Target 80 Kit
Target PM80 Kit and PM80 Pods
Target PM80 SE
Not compatible with:
Luxe PM40 kit and pods (applicable coils are the GTX 0.6, 0.8 and 1.2 Ohm)
GTX ONE Kit (with GTX Tank 18) (applicable coils are the GTX 0.6, 0.8 and 1.2 Ohm
Smok – V12 Prince – M4 Coil 0.17ohm Coil (each)
Smok - V12 Prince - M4 Coil 0.17ohm Coil (each)
The V12 Prince-M4 coil head is suitable for SMOK TFV12 Prince tank atomizer. The V12 Prince-M4 core features 0.17 ohm resistance which supports 30~70W power output (best 45~55W). This SMOK TFV12 Prince coil head is applicable to mechanical mod and will bring you silky and rich cloud taste.
Airscream – AirsPops – Bottle 0.6ohm coils (each)
Voopoo – PnP TW Replacement Coil (each)
Airscream – AirsPops – Pro 1ohm coils (each)
Voopoo – PnP – RBA 0.6ohm – 10 coil set
Voopoo – ITO – MO 0.5ohm Coil (each)
Voopoo – ITO – M3 1.2ohm Coil (each)
Vaporesso – GTi 0.2ohm (per coil)
Vaporesso – GTi 0.15ohm (per coil)
Smok – Novo 4 LP1 coil Meshed 0.9ohm MTL (each)
The Smok Novo 4 Replacement LP1 Coils are specially designed for leak-proof vaping. Each coil in this series uses 3 silicone rings to provide tightness. The LP1 series coils have: LP1 Meshed 0.8ohm Coil, LP1 DC 0.8ohm MTL Coil, and LP1 Meshed 1.2ohm Coil. When inserting the coil into the Smok Novo 4 Pod, the added silicone ring on the bottom of the coil would fill the gap, effectively stemming the liquid leaking from the pod that results in a messy vaping experience or dirty hand. The LP1 series Coil is compatible with Smok Novo 4 Pod Cartridge and Smok Novo 4 Pod Kit, Novo 4 mini kit, pozz pro kit, and Nfix Pro Kit.
Smok – TFV18 Dual Mesh 0.15 ohm Coil (each)
SMOK TFV18 Baby Replacement Coils
Check out the SMOK TFV18 Replacement Coils, a set of mesh replacement coils offered in 0.33ohm Single Mesh and 0.15ohm Dual Mesh for maximum flavor.
SMOK TFV18 Replacement Coils Features:
TFV18 Mesh Coil Series
- 0.33ohm TFV18 Meshed Coils – rated for 80-140W (Best at 100-110W)
- 0.15ohm TFV18 Dual Meshed Coils – rated for 80-140W (Best at 100-110W)
Voopoo – PnP Replacement Coil (each)
VOOPOO PnP Replacement Coils
VOOPOO PnP Replacement Coils are a set of plug 'n' play coil atomizer heads, crafted in a single, dual, ceramic coil, or mesh to allow for different vaping styles like direct-to-lung and mouth-to-lung to become the suitable vape system for each individual user.
VOOPOO PnP Replacement Coils Features:
1.2ohm PnP-TR1 Coil - rated for 10-15W (MTL)
0.6ohm PnP-TM1 Mesh Coil - rated for 20-25W (Half DL)
0.8ohm PnP TM2 Mesh Coil - rated for 12-18W (Half DL)
0.15ohm PnP-VM6 Mesh Coil - rated for 60-80W (DL)
0.2ohm PnP-VM5 Mesh Coil - rated for 40-60W (DL)
0.6ohm PnP-VM4 Mesh Coil - rated for 20-28W (Half DL)
0.45ohm PnP-VM3 Mesh Coil - rated for 25-35W (DL)
0.3ohm PnP-VM1 Mesh Coil - rated for 32-40W (DL)
0.45ohm PnP-M1 Single Coil - rated for 28-35W (DL)
0.6ohm PnP-M2 Single Coil - rated for 20-28W (DL)
0.8ohm PnP-R1 Dual Coil - rated for 12-18W (MTL)
1.0ohm PnP-R2 Dual Coil - rated for 10-15W (MTL)
1.2ohm PnP-C1 Ceramic Coil - rated for 10-15W (MTL)
Plug 'n' Play Coil Installation
Organic Cotton
Smok – RPM 3 Mesh 0.15ohm Coil (each)
Smok RPM 3 Mesh Coils
Smok RPM 3 Mesh Coils the all-new RPM 3 coil is the new mesh coil that has been adopted to enhance the flavor more efficiently, and due to the larger mesh surface area. With this being said the RPM 3 coil delivers a hotter more tantalizing vape keeping you coming back for more.
The Smok RPM 3 Mesh coils come in two variations-
RPM 3 Mesh 0.15ohm (40-80w)
RPM 3 Mesh 0.23ohm (20-45w)
Smok – RPM 3 Mesh 0.23ohm Coil (each)
Smok RPM 3 Mesh Coils
Smok RPM 3 Mesh Coils the all-new RPM 3 coil is the new mesh coil that has been adopted to enhance the flavor more efficiently, and due to the larger mesh surface area. With this being said the RPM 3 coil delivers a hotter more tantalizing vape keeping you coming back for more.
The Smok RPM 3 Mesh coils come in two variations-
RPM 3 Mesh 0.15ohm (40-80w)
RPM 3 Mesh 0.23ohm (20-45w)
OFRF – NexMesh 0.15ohm (each)
OFRF nexMESH Triple Density Mesh Coil is designed for OFRF Gear RTA. It utilizes Next Generation Mesh Coil Technology to achieve enhanced flavor and lightning-fast heating.
nexMESH triple grid density delivers 3 times the holes of your average mesh to cover more surface area when your cotton is fitted.
The greater surface area allows for faster heating producing a more intense flavor and smoother vapor with reduced spit back
Physical Parameter:
SS316L nexMESH Mesh Coil
-
- 0.15 ohm
- Wattage Range: 50W – 80W
- Recommended Wattage Range:65W – 75W
- Temperature Range: 180℃-300℃ / 350℉-570℉.
Vaporesso – GTi 0.4ohm (per coil)
Geek Vape – Zeus Z0.4 Mesh Coil 0.4 Ohm (each)
Wattage range 50-60W.
Applicable to the following Geek Vape products:
- Z Sub-Ohm Tank
- Z Sub-Ohm 2021 Tank
- L200 Kit
- Obelisk 120 FC
- Z0.15 - 0.15Ω Ohm (80-90W) new
- Z0.2 - 0.2Ω Ohm (70-80W)
- Z0.25 - 0.25Ω Ohm (45-57W) new
- Z0.4 - 0.4Ω Ohm (50-60W)
Kamikaze – MTL Fused Clapton – 4 coil set
Vaporesso – GT CCELL 2 Coil 0.3ohm (per coil)
Vaporesso GT CCELL 2 stainless steel and ceramic coils 0.3Ω.
Compatible with the following Vaporesso tanks:
- NRG tank
- NRG Mini tank
- NRG SE tank
- Cascade tank (you will need to use the 'GT coil adapter)
- Cascade Baby tank
- Cascade Mini tank
Aspire – Breeze 2 coil (each)
The Aspire Breeze Replacement Coil is the innovative U-tech coil cross-compatible with Aspire Breeze 2 and Breeze Pod System. Wicked with 100% Japanese organic cotton and superior Kanthal to enrich the flavor concentration and authenticity, the Breeze Coil can offer you an amazing vaping experience of pure flavor and dense vapor with your favorite E-Juice. The Breeze Coil comes with 3 options, the 1.0ohm and 1.2ohm are designed for Nicotine Salts E-liquids while the 0.6ohm can work best with traditional E-Liquids.
Features:
- Resistance: 0.6ohm, 1.0ohm, 1.2ohm
- Innovative U-tech Coil Technology
- Pure and Rich Flavor
- 100% Japanese Organic Cotton
- Long-Lasting and Durable
- Easy to Replace
Geek Vape – P coil 0.4 ohm (each)
Wattage range 50-60W.
Compatible with the following Geek Vape devices:
- Aegis Boost Pro Kit
- P0.2 - 0.2Ω Ohm - mesh (60-70W)
- P0.4 - 0.4Ω Ohm - mesh (50W-60W)
Smok – V8 Baby – Q2 coil (each)
The V8-Q2 atomizer heads for the TFV8 Baby Beast offer the highest resistance out of all the coils brought to you by SMOKtech. At 0.4 ohms, each V8-Q2 utilizes dual vertical coils carefully engineered to work wonders and bring you that legendary SMOK caliber flavor from devices that operate at a lower wattage. They have a wattage range of 40-80W with optimal performance between 55-65W. These babies are also wicked with top-shelf pure organic cotton and thoroughly tested for quality so you’re guaranteed the absolute best experience possible when you’ve got the V8-Q2 in your TFV8 Baby Beast.
Features:
Pure Taste
Organic Cotton
Kanthal Vertical Heating Element
Resistance: 0.4 ohm
Recommended Wattage: 40W - 80W / Best 55W - 65W
Smok – Nord DC MTL – 0.8 ohm (each)
KEEP OUT OF REACH OF CHILDREN. IF SWALLOWED: Rinse mouth. IF ON SKIN: Wash with plenty of soap and water. Call a POISON CENTRE or a doctor/physician if you feel unwell. To avoid the risk of fire, injury, and/or damage to your E-Cigarette product or other property, only charge your E-Cigarette device with the equipment provided in your kit, or with compatible charging accessories.
- SMOK Nord Mesh MTL 0.8ohm Coil (5pack). As the name suggests, the 0.8 Mesh MTL coil is designed for Mouth to lung vaping but will provide a higher output of vaper for a more substantial hit.
- Specially designed for use with Smok's innovative Nord Pod Vape Kit.
- Durable high-temperature resistant coils offer a wonderfully versatile vaping experience.
- Liquid included: No.
- Store in a cool, dry, well-ventilated place—recommended storage temperature: 0 ° C to 25 ° C.
- Includes: 5 x 0.8 Ohm Coils.
- Ingredients: 5 x 0.8 Ohm Coils.
Smok – Baby V2 A2 coil (each)
SMOK TFV8 Baby V2 Replacement Coils
The SMOK TFV8 Baby V2 Replacement Coils are high-performance MAXIMUM MESH replacement coils for the TFV8 Baby V2 Sub-Ohm Tank and continue the classic TFV8 series coil design with a more highly tuned mesh function. The TFV8 Baby V2 Replacement Coils come in three types: the A1, A2, and A3 coil family (All of which does are NOT compatible with the TFV8 Baby Beast); The A1 coil head features a large heating area, rated at 0.17 ohm, single mesh with the capabilities of 90 to 140W (recommended at 110 to 130W). The A2 coil head features dual heating cores for larger clouds, rated at 0.2 ohms, and double mesh coils with the capabilities of 50 to 80W (recommended at 65 to 75W). The A3 Coils are meant for pure flavor and thicker clouds, rated at 0.15ohm, triple mesh coils with the capabilities of 60 to 100W (recommended at 80 to 90W).
Smok – TFV9 Coil Meshed 0.150hm (each)
Smok TFV9 Mesh Coil 0.15ohm:
The V9 meshed coil is made of Kanthal, featuring a large heating contact surface area to produce huge clouds and superb flavor with less heating time.
TFV9 Meshed 0.15ohm Coil 1 x 5
- Material: Kanthal
- Strong Power & Huge Vapour Production
- Resistance: 0.15ohm
- Wattage: 40-90W
Voopoo – TPP-DM4 Coils (each)
The Voopoo TPP Pod tank is an amazing little pod made to accompany the Voopoo Drag-X Plus. With an easy and mess-free fill hole and push and plug coil options, this tank is built for maximum flavor and super dense vape clouds. It is primarily a high-power tank but is suited perfectly for sub-ohm vapers.
Smooth And Flavorsome Coils
The Voopoo Drag-X Plus & Drag 3 Pod features a brand new range of coils to Voopoo’s arsenal, The TPP series of coils. The brand new TPP coils are incredibly unique, smooth, and flavorsome coils made primarily for sub-ohm vapers and provide an amazing hit at higher wattages.
TPP-DM1 0.15ohm Coil – 60w – 80w
TPP-DM2 0.2ohm Coil – 40w – 60w
TPP-DM3 0.15ohm Coil – 80w – 100w
TPP-DM4 0.3ohm Coil – 32w – 40w
Key Features:
Resistance: 0.15ohm or 0.2ohm
Recommended for use with E-liquids below 10mg nicotine strength
Sub-Ohm
Compatible with: Voopoo TPP Pod Tank, Voopoo Drag-X Plus & Drag 3 Kit
Coil Factor – Amplified Aliens (Single) TMN80
Amplified Aliens set
- 3*28/36 Twisted Messes Ni80,
3mm ID (wrapped for a 2post block design) ,
0.25 ohms Single (resistance may vary based on leg length).
The King Of Flavor!! Our Amplified Aliens are prestigious for their amazing flavor and longevity and were designed to work with your favorite 2block post design atomizers such as; The Wasp Nano/RDTA , Serpent SMM, Amit 25 Single etc. CoilFactor coils are 100% safe to use on unregulated and Full Mechanical devices (use at your own risk - always puls on a regulated device and use a safe battery for your mechanical devices)
Vaporesso – GTR Coil 0.4ohm (per coil)
Features:
- FORZ Kit & Tank Replacement Coils
- Sub Ohm Vaping
- Mesh Builds
- Compatible With High VG E-Liquid
Uwell – Caliburn G2 UN2 Meshed Replacement Coils 1.2 Ohm (each)
Uwell Caliburn G2 Replacement Coil is designed for Uwell Caliburn G2 Pod System Kit 750mah. Uwell Caliburn G2 cartridge adopts Pro-FOCS flavor adjusting tech to provide you with an original taste and pure flavor.
Parameters:
Resistance: FeCrAI UN2 Meshed-H 1.2ohm(9-13W)
Features:
Pro-FOCS flavor adjusting tech
MTL & restricted DTL vaping
Geek Vape – P coil 0.2 ohm (each)
Wattage range 60-70W.
Compatible with the following Geek Vape devices:
- Aegis Boost Pro Kit
- P0.2 - 0.2Ω Ohm - mesh (60-70W)
- P0.4 - 0.4Ω Ohm - mesh (50W-60W)
Voopoo – TPP-DM1 Coils (each)
The Voopoo TPP Pod tank is an amazing little pod made to accompany the Voopoo Drag-X Plus. With an easy and mess-free fill hole and push and plug coil options, this tank is built for maximum flavor and super dense vape clouds. It is primarily a high-power tank but is suited perfectly for sub-ohm vapers.
Smooth And Flavorsome Coils
The Voopoo Drag-X Plus & Drag 3 Pod features a brand new range of coils to Voopoo’s arsenal, The TPP series of coils. The brand new TPP coils are incredibly unique, smooth, and flavorsome coils made primarily for sub-ohm vapers and provide an amazing hit at higher wattages.
TPP-DM1 0.15ohm Coil – 60w – 80w
TPP-DM2 0.2ohm Coil – 40w – 60w
TPP-DM3 0.15ohm Coil – 80w – 100w
TPP-DM4 0.3ohm Coil – 32w – 40w
Key Features:
Resistance: 0.15ohm or 0.2ohm
Recommended for use with E-liquids below 10mg nicotine strength
Sub-Ohm
Compatible with: Voopoo TPP Pod Tank, Voopoo Drag-X Plus & Drag 3 Kit